|
So, things are getting tight and the car has slipped to the bottom of a ever growing to do list,
the decision has been made to sell up. starting with everything pretty much not bolted to the car.
i have a few boxes of bits to get rid of containing
1500 sp case- line bored
unmolested 1600 tp case
dual curc master cyinder + res
good 1300 B+p and tp heads
2 vac dizzys
1500 sp heads
1300 tp heads beginings of porting
1600 tp heads cracked
sp fan shroud
pr heat exchangers
2 fly wheels
12v dyno stand and fan
2x cranks
rods
69mm wbx crank
steering box
set torsion arms 3/4 ok
tp oil cooler
cams
still packaged cam gear
anti roll bar
Really would like this stuff gone swift so £125 gets it all. if thats not a fair pirce make m an offer.
full set of Day mouldings 67 on fibreglass wings in primer. small slots, horn grills but no indicators and 1200 spec rears. after £150 no less as i went down to pick em up so im already loosing on the fuel. these are up on berwick so if you want em ill need a bit of notice to get them here.
Remote oil cooler kit would like £50, consists of
Serck 6"x9" oil cooler
Serck oil thermostat
Mocal sandwich plate
Ports right remote filter head
Rapid cool oil pump take off cover
some hoses
contact me on 07595901710 ta lee
|
Login
